Objective

Unit 1 - Authorised Gas Tester
LO1: Confined space criteria
LO2: The type of operations being tested for flammable and toxic gases
LO3: The hazards of operations within an oxygen-enriched, oxygen-deficient, toxic or flammable environment
LO4: Carrying out a suitable and sufficient risk assessments
LO5: Understand the safe systems of work, how to work within the safe system of work and the associated responsibilities
LO6: The implications of statutory and organisational requirements
LO7: Interpreting operational requirements
LO8: How to select, use and care for PPE and RPE
LO9: How to access and interpret the relevant operational instructions
LO10: The operating principles of atmosphere monitoring and measuring equipment and frequently observed failure modes
LO11: The strengths and weaknesses of the various types of atmospheric flammable and toxic gas detection equipment
LO12: How to correctly select between aspirating and non-aspirating detectors to obtain a representative sample of the atmosphere being tested
LO13: Equipment required for testing for hydrocarbons in inert atmospheres
LO14: Gas detector pre-start checks
LO15: Determining the extent of the test boundaries
LO16: Calibrating the instruments used in atmospheric testing
LO17: Sources of assistance in the event of damaged or defective equipment
LO18: How to interpret the results, to include both normal and abnormal
LO19: How to document the results and advise relevant personnel

Unit 2 - Testing for Flammable Gas in Preparation for Hot Work
LO1: Hot work (any operation involving naked flames or producing heat and/or sparks or any operation that has spark potential)
LO2: The type of operations being tested for flammable and toxic gases
LO3: The principles of hot work gas testing
LO4: The hazards and properties of flammable gases
LO5: Acceptable levels of flammable gases and the correct amount of oxygen
LO6: Carrying out a suitable and sufficient risk assessment before testing activities
LO7: Using safe systems of work and understanding the associated responsibilities
LO8: The different types of detectors used for the flammable product
LO9: How to set up the relevant detector for each gas testing application and confirm its correct functioning
LO10: The range and frequency of tests and monitoring and retesting requirements
LO11: Where to site portable or transportable equipment that will be used to continuously monitor the atmosphere

Unit 3 – Confined Space Testing
LO1: The hazards and properties of flammable and toxic gases
LO2: The behaviour of different gases
LO3: The range and frequency of tests and monitoring and retesting after the initial entry
LO4: Acceptable levels of flammable and toxic gases and the correct amount of oxygen
LO5: The implications of WEL for toxic gases and LEL for flammable gases
LO6: How to set up the relevant detectors for each gas testing application and confirm functioning correctly
LO7: Performing gas tests in sequence
LO8: How to obtain representative atmosphere sample
LO9: Taking various samples to locate varying concentrations of gases and vapours
LO10: Importance of sampling confined spaces at a distance
LO11: Testing flammable gases in inert atmospheres
LO12: Where to site portable or transportable equipment that will be used to continuously monitor the atmosphere

Unit 4 - Gas Monitoring
LO1: Responsibilities of the Fire Watch
LO2: Responsibilities of the Standby Person
LO3: Responsibilities of the Gas Monitor role
LO4: Impact of environmental changes on working conditions
LO5: The importance of checking that the controls on the equipment are as specified
LO6: Sources of assistance and specialist support

Target Group

Oil & Gas Industry

Prerequisites

No training prerequisites are required to sit this course.
OPITO requires that the delegate sitting this course provide photographic ID and their date of birth before starting this training.

Your identification documents are required to validate your identity.
The following documents are accepted:

Passport
Driving Licence
Form of government issued ID
What should I do to confirm my identity?

Take a "selfie" by holding your ID card
Card holder name and ID card should match and be clearly visible
Your ID must be next to your face
Please note: Your image provided to us will be deleted from our records after verification is complete.

Examination

This course is CPD approved. The assessment is taken during the course and is within the expected duration.

Course Contents

The course is available in the following languages: English; Brazilian Portuguese; Spanish; Danish; Norwegian
This course is accredited to the OPITO Authorised Gas Tester standard and has been designed to equip delegates with the knowledge to conduct gas testing within confined spaces and awareness of associated confined hazards. The authorised gas tester role is critical in testing for and ensuring safe working atmospheres, in particular: permit-controlled confined spaces, and prior to and during hot work.

Our course has been developed in bitesize learning chunks for each topic. At the end of each unit, there will be an assessment. Delegates will need to pass each module at 80 percent or above. When you pass the course, you will be issued with a certificate which is valid for 3 years.

The aim of this course is to teach you the requirements associated with gas detection. On successful completion, you will have the basic knowledge necessary to allow you to operate as an Authorised Gas Tester. You will be given two attempts at each module, and you must score 80 percent to pass.

OPITO Standards Information
It is the responsibility of delegates taking an OPITO-Approved e-Learning Course to use the links below to access the appropriate Course Standard (on the OPITO website) so that they are aware of the requirements of the OPITO Standards.
Please click here: https://www.opito.com/standards/authorised-gas-tester

Learning outcomes per unit:
Authorised gas tester
Outcome: Relevant Legislative Controls
Outcome: The principles and use of Atmosphere Measuring and Monitoring Equipment
Testing for flammable gas in preparation for hot work
Outcome: Gas Testing for Hot Work
Confined space testing
Outcome: Gas Testing in Confined Spaces
Gas monitoring
Outcome: Providing Safety Watch Duties